The main characteristic of high manganese steel (Mn 13) hammerhead is that under the action of large impact or contact stress, the surface layer will quickly produce processing hardening, its processing hardening index is 5-7 times higher than other materials, good toughness, good technology, low price, and the wear resistance is greatly improved. However, the hammer head of the high manganese steel crusher has high requirements on the overall performance of the压碎机{.如果实际工作不足或接触压力在实际工作中很小，则表面无法快速产生处理硬化，以免发挥其适当的耐磨性.，因此希望大多数顾客应根据必要的设备的实际效果，并最大程度地播放设备的实际效果，使设备的实际效果能够最大程度地播放。
高锰钢锤高锰钢是锤子传统材料不耐磨损，使用寿命短而破碎的石灰石
锤子通常可以工作2-3月，在某些工作条件下，使用少于一周，高凶猛的钢锤不耐磨损，其中一个是优先考虑锤子的磨损，第二个是锤子破碎机在操作过程中的锤子锤锤的影响并不大，使高含量的钢铁锤加工硬化效果更大的效果更大的效果更大的效果，这是更大的影响力{2受到的收到，加强效果的显着意义是.，因此，作为大锤头的材料，增强的高锰钢仍然是一种可选的材料.添加Cr增强高锰钢锤，在粉碎铁矿石中，YU锤的使用寿命为50％的高含量的曼尼兰钢铁，也可以使用17％{17％{钢，并添加Cr，Mo元素，提高其产量强度和初始硬度，还可以很好地利用了实际生产效果.
锰钢锤以不提高锤子的价格，并且可以根据减少锰的减少，奥氏体稳定下降的使用来实现ZGMN13锤子的使用，从而改善奥氏体变形硬化效果的理论基础，Yu gong Company Yu Gong Compani increased, has achieved good use effect. The biggest advantage of manganese steel hammer head in casting is that it has its magnetism, which can remove the iron scraps in the ore through magnetic separation to ensure the sintering quality of ceramic products. Because of the lack of magnetic property, the grinding chips are mixed in the sodium stone powder, which will affect the sintering quality of ceramic产品.锰钢锤的使用寿命比ZGM 13.增加了60％以上
Low alloy steel hammer head high chrome cast iron composite hammer head, although has a high service life, but its manufacturing process is complex, at the same time, the iron block is strictly prohibited to enter the crusher, generally required to feed in the front end of the secondary iron suction device. All along, the company has developed a variety of multiple low alloy steel hammerheads, its matrix tissue has martensite, bainite or martensite plus在相同的工作条件下，它的使用寿命至少是高锰钢锤头{.锤头的使用不同程度的耐磨磨损和切割磨损，高韧性和高硬度要求的使用，但正如我们都知道的，强硬性和硬度征服的实际情况{我们必须完全了解极端磨损机制的工作条件，合理选择材料.
